Do pavers need new sand before sealing? Usually, yes. A deep pressure wash pulls old sand out of the joints. Those joints get refilled, most often with polymeric sand, and then the sealer goes on to lock the sand in place. Sealing over empty joints leaves pavers loose and gives weeds and ants an easy way in.
What joint sand does
The sand between pavers is not decoration. It keeps the pavers from shifting, spreads the weight of cars and feet across the surface, and fills the gaps where weeds would root. When joint sand washes out, pavers can rock, settle and spread apart.
Regular sand vs polymeric sand
| Regular joint sand | Polymeric sand | |
|---|---|---|
| How it works | Loose sand packed into joints | Sand mixed with a binder that hardens when wet |
| Washout | Washes out over time | Resists washout once cured |
| Weeds and ants | Easy to get through | Harder to get through |
| Install needs | Simple | Dry pavers, then water to activate, then a dry forecast and above-freezing temperatures per the label |
Why the order matters
- Clean first. Pressure washing removes dirt, moss and algae, and also pulls out old joint sand.
- Repair second. Settled pavers are lifted and leveled before new sand goes in.
- Sand third. Joints are filled to the right level. Too low and pavers can shift. Too high and the sand smears on the surface.
- Seal last. The sealer protects the surface and helps lock the sand in.
Skipping step 3 is one of the most common reasons a sealing job looks good for a month and then lets weeds right back in. For more on weeds, read Does Paver Sealing Prevent Weeds?
How NJ Paver Sealing does it
Sanding is step 4 of our 5-step process. We use polymeric sand and fill each joint to the proper level, which stabilizes the pavers and helps stop weed growth. Then we seal to lock it in. If pavers have settled, we repair them before the sand goes in.
We work on concrete, bluestone, limestone and other paver materials from Point Pleasant Beach to Barnegat.
Weeds coming through your joints? Call 848-205-5536 or request a free quote.
FAQ
Can I add polymeric sand myself?
You can, but it is easy to get wrong. Sand left on the paver surface hardens into a haze.
Can you re-sand pavers in winter?
Polymeric sand needs dry, above-freezing conditions to cure. At the shore, that usually means spring.
Do I need to re-sand if my joints look full?
If the joints are full and firm, maybe not. We check during the quote.